Bosal Poly-Therm Fleece

Available by the half metre:

1 unit = W62" or 157 cms x L 0.5 metres

2 units = W62" or 157 cms x L1 metre

3 units = W62" or 157 cms x L1.5 metres

4 units = W62" or 157 cms x L2 metres

For multiple units you will receive the Poly-Therm fleece in one continuous length unless you otherwise specified.

If you would like more units simply enter the number of units required.

Heat-resistant Poly-Therm fleece created by Bosal.  100% polyester/polyethelene.

Poly-Therm is ideal for place mats, table runners and more and has the added advantage of being non-rustling.

IMPORTANT:  The Poly-Therm fleece is heat-resistant not heat-proof and with any hot items, care must be taken.

62" or 157 cms wide.

The Poly-Therm is cut using scissors and/or a rotary cutter.  Every effort is taken to be as accurate as possible.

Please note that there is a minimum postage charge of £2 for UK orders below £20.  For full details of Post & Packaging just click on the link.

INSTRUCTIONS FOR BOSAL’S  POLY-THERM FLEECE

* MUST USE TWO LAYERS OF POLY THERM FLEECE WITH THE HEAT REFLECTIVE FACING OUTWARD.

* TWO LAYERS ON BOTH SIDES IF MAKING AN OVEN MITT, TWO LAYERS FACING IN EITHER DIRECTION TO REFLECT HEAT.

*  IF USING TO INSULATE 1 LAYER CAN BE USED, BOSAL RECOMMENDS TWO FACING INWARDS FOR BETTER INSULATION.

* 100% COTTON BATTING MUST BE SEWN IN BETWEEN BOTH LAYERS TO SECURE PROPER HEAT REFLECTIVE.

* MACHINE WASHABLE AND DRY CLEAN, TUMBLE DRY LOW OR LINE DRY.

* NO ADDITIONAL CHEMICALS OR DETERGENTS NEEDED.

* MAKE SURE YOUR PROJECT IS DRY BEFORE USING HEAT.